Flocculant Liquid
One of the most frequent problems occurring during care of water in the pool is creation of turbidity caused due to fine mechanical or organic impurities or remnants after algae liquidation. If FLOCCULANT LIQUID agent is used, these fine particles will be transformed into a form that may be removed through filtration in sand or cartridge filters.
Product information
Before adding the product to the pool, adjust the water pH to a value between 6.5 and 6.8 by using pH MINUS or pH PLUS according to the instructions for use printed on the product packaging.
Depending on the level of water contamination, FLOCCULANT LIQUID product in the amount of 10 – 50 ml is added per 10 m3 of water in the pool. The measured amount is diluted in water (50-100 ml of the product per 1 litre of water) and is evenly sprinkled on the water level with the water circulation turned on for about four hours in order to mix the product with the water. Then the circulation will be switched off for 12 hours. During this period, big floccules of impurities will precipitate in the water and can be removed with a pool vacuum cleaner or trapped in the filtration system. If you do not succeed in altering the water in the pool to the quality required, the whole procedure is to be repeated.”