Chlorine Start
The fast soluble organic chlorine-containing granulated agent is used for rapid water treatment at the beginning of the season or after the pool is refilled again.
Product information
If the product is used, the required chlorine concentration is achieved quickly and the conditions for later application of products used for long-term water quality maintenance will be created.
Before using the product, adjust the water pH value to 6.8-7.6 by using pH MINUS or pH PLUS. In the case of hard water, its hardness may be stabilised with WATER HARDNESS STABILIZER, all this according to the instructions for use printed on the product packaging.
CHLORINE START in the amount of 40-80 g/10 m3 is slowly poured into the skimmer or the levelling tank so that the granulate is gradually drawn into the circulation system. The measured amount of the product may also be dissolved in a plastic bucket and the created solution may then be slowly poured into the skimmer while the water circulation is switched on. The water contained in the pool must be mixed properly and if the active chlorine concentration found with a tester is lower than 0.3 mg/l, add more of the product. After the water in the pool is treated with CHLORINE START, CHLORINE TABS or COMBI TABS are used for long-term treatment of the pool water according to the instructions for use printed on the product packaging.”