Search
+420 466 530 357
Oxy Tabs 200 g
Unlike chlorine-containing agents, no unpleasant smell is created and eyes, mucous parts and skin do not become irritated while chlorine-free agents based on active oxygen are used, nevertheless care of the pool is more demanding if quality water is to be achieved, especially due to the necessity to check its quality more frequently.
products from line PROPOOL®
Product information
After the pool is filled with water or when the pool is to be used again at the beginning of the season, the pH value of the water must be adjusted to a value between 6.8 and 7.6 by using pH MINUS or pH PLUS. If the water is hard, it may be stabilised by adding WATER HARDNESS STABILIZER. Before OXI TABS 200 g are used for the first time (at the beginning of the season or after the pool is filled), apply OXI START according to the instructions for use printed on the product packaging.
Then one piece of OXI TAB 200 g per 10 m3 of water in the pool is put in the float or in the tablet dosing unit. This amount should be sufficient to maintain the necessary concentration of active oxygen in the water between 8 and 16 mg/l for 5 to 10 days depending on the factors affecting the amount of active oxygen in water, e.g. the air and water temperature, sunshine intensity and pool load. If the pool is subject to a higher load, two pieces of OXI TABS 200 g per 10 m3 of water in the pool may be applied. The correct active oxygen concentration and the right pH value should be checked regularly with a suitable tester. In order to prevent algae from occurring or if algae have already appeared, it is suitable to use ALGAE STOP in parallel according to the instructions for use on its packaging.
