Search
+420 466 530 357
Chlor Langzeittabs 200 g
After the pool is filled with water or when the pool is to be used again at the beginning of the season, the pH value of water should be altered at first using pH MINUS or pH PLUS agents to the value between 6.8 and 7.6. In the case of hard water, its hardness may be stabilised with addition of WATER HARDNESS STABILIZER agent. Then the first chlorinating with CHLORINE START agent is performed, all according to the instructions for use shown on these agents.
products from line PROPOOL®
Product information
Then one piece of CHLORINE TABS 200 g per 10 m3 of water in the pool is put in the float or in the dosing unit. This amount should be sufficient to maintain the necessary concentration of active chlorine in the water between 0.3 and 0.5 mg/l for 5 to 10 days depending on the factors affecting the amount of active chlorine in water, e.g. the air and water temperature, sunshine intensity and pool load. The correct active chlorine concentration and the right pH value should be checked regularly with a suitable tester. In order to prevent algae from occurring it is suitable to use ALGAE STOP in parallel. If the water quality suddenly becomes worse or if algae occur, one-time treatment of water with CHLORSHOCK GRANULAR may be performed, all according to the instructions for use printed on the product packaging.
